Slide

HistoBond®+ slides are suitable for immunohistochemistry and in situ hybridization. Both surfaces of these slides bond tissue sections adhesively with their positive charge. No additional adhesives are required. The reliable anchoring prevents tissue sections to float during washing and cooking and, thereby, saves time and costs in the laboratory.

HistoBond®+ slides have a printed area of approx. 20 mm which can take notes printed by most types of printers and can be written with permanent markers (e.g. laboratory marker SKU 6130603). Different colours of the labelling area offer the possibility to distinct the preparations (by users, priorities etc.).

Dark markings contrast especially well with the bright colours of the labelling areas and thus facilitate the identification of preparations. The thin layer of the marking area prevents the slides from sticking together and enables using them on automated systems.

• made of soda lime glass of third hydrolytic class
• in compliance with DIN ISO 8037-1
• dimensions: approx. 76 x 26 mm
• thickness: approx. 1 mm (tol. ± 0.05 mm)
• pre-cleaned and ready for use
• autoclavable
• in plastic boxes of 100 pieces, 20 boxes in a carton
• for applications according to EU regulation 2017/746 on in vitro diagnostic medical devices (IVDR), with CE-mark, recommended best before date and batch number for comprehensive information and traceability

HistoBond®+S microscope slides are suitable for immunohistochemistry and in-situ hybridization. They offer a considerably higher positive charge than the regular HistoBond®+ slides. This improves the adhesion of the tissue sections to the glass even under less favourable conditions, e.g. when using alkaline reagents.

HistoBond®+S slides have a printed area of approx. 20 mm which can take notes printed by most types of printers and can be written with permanent markers (e.g. laboratory marker Cat. No. 6130603). Different colours of the labelling area offer the possibility to distinct the preparations (by users, priorities etc.).

Dark markings contrast especially well with the bright colours of the labelling areas and thus facilitate the identification of preparations. The thin layer of the marking area prevents slides from sticking together and enables using them on automated systems.

• made of soda lime glass of third hydrolytic class
• meet the requirements of DIN ISO 8037-1
• dimensions: approx. 76x26 mm
• thickness: approx. 1 mm (tol. ± 0.05 mm)
• pre-cleaned and ready for use
• autoclavable
• in plastic boxes of 100 pieces, 20 boxes in a carton
• for applications according to EU regulation 2017/746 on in vitro diagnostic medical devices (IVDR), with CE-mark, recommended best before date and batch number for comprehensive information and traceability

Special manufacture: Minimum order 10 packs of 100 pieces.  Deliveries of excess and shortage quantities have to be accepted.