Ratek
Dry block heaters, hybridisation ovens, mixers & shakers, shaking incubators, refrigeration units, immersion heater circulators, water baths & warming trays.
Ratek 7L advanced digital LED waterbath, ambient +5c to 100c
Seamless Tank With Excellent Spacial Uniformity
Bright Dual-Line Digital LED Display
Precision 0.1 deg C Digital Operation
User Configurable Process Temperature Alarm
Built-in Adjustable Drain Tap
Ratek Analogue Warming Tray, 450 x 250mm, ambient + 5°C to 80°C
Anodised aluminium heating plate
Even heat transfer
Temperature range between 30°C and 80°C
Safety thermal cutout
Easy to use solid state analogue control
This slide warming tray has a 450 x 250 mm. anodised aluminium heating plate mounted on a powder coated steel base. Use of a one piece pad type element bonded to the heating plate ensures that an even heat is maintained within the working area of 400 x 200mm. Temperature setting is by an analogue control on the front panel, with indicators for power on, and heating on. The WT1 has a temperature range of approximately 28°C to 80°C (min 5°C above ambient) and can be used for a variety of purposes. For safety a thermal cut out is fitted, this will remove power to the element in the event of overheating due to control failure.
Ratek Block for 20 x 1.5ml Eppendorf tubes
Ratek Immersion Cooler with Drip Coil
580 Watts cooling capacity
Corrosion resistant stainless steel immersion coil
Mounting clamp fixes the coil to any tank
Below-ambient and sub-zero control with THx000
110mm minimum water level
Product Overview
The RC1 has an insulated stainless steel flexible line approximately 1 metre long with a stainless steel coil supported by an adjustable mounting bracket. This cooler can cool 8 litres of water in an insulated tank from 30°C to 5°C in approximately 25 mins. When used with the Ratek TH5 Thermoregulator the RC1 can provide temperature controlled water at or below ambient temperatures, accurate to ± 0.1°C. For temperatures below 0°c a solution of Ethylene Glycol 50% / Water 50% is recommended. The case for the RC1 is manufactured from a corrosion resistant plastic to provide durability. Only environmentally friendly R134a refrigerant is used in Ratek coolers.
Ratek Rotary Suspension Mixer, speed 10-60 RPM
The RSM7DC Rotary mixer is suitable for many applications where an end over end action is required, including blood and sample mixing.
The tilting head allows for the disc to be held at any angle from horizontal to vertical enabling a wide range of different mixing actions. Loaded evenly with the locking screw removed the disc can rotate and be stopped by hand without switching off the drive, making tube placement and removal a simple operation. A centre locking screw is provided for heavier and unbalanced loads. The RSM7DC is supplied with a disc that has 20 threaded inserts and clips for tube diameters to suit customer specifications, please specify sizes when ordering. Individual clips can be removed and replaced if required.
Ratek Waterbath 24 Ltr capacity, Digital LCD, useable tank dimensions W273 x D450 x H145
24L Advanced Digital LED Waterbath
Seamless Tank With Excellent Spacial Uniformity
Bright Dual-Line Digital LED Display
Precision 0.1 deg C Digital Operation
User Configurable Process Temperature Alarm
Built-in Adjustable Drain Tap
Universal Rack to suit medium mixers, 350 x 350mm
Secures containers for high-speed mixing
Rubber covered bars with adjustable position
Simple drop-in lift-out tray, no fittings required
Will clamp flasks, beakers, bottles and tube racks
Additional bars available
Description: 350 x 350mm stainless steel chassis with nitrile mat on base, and 4 rubber covered bars with thumbscrews. Self contained unit removable from mixer.
Models supported: RR5 suits the following mixers: EOM5 Orbital, OM6 Orbital, RM2 Reciprocating, ERPM4 Rocking Platform, RPM5 Rocking Platform
Dimensions: 350 x 350mm
Universal Rack to suit OM11 Shaking Incubator, 400 x 400mm
Secures containers for high-speed mixing
Rubber covered bars with adjustable position
Simple drop-in lift-out tray, no fittings required
Will clamp flasks, beakers, bottles and tube racks
Additional bars available
Description: 400 x 400mm stainless steel chassis with nitrile mat on base, and 4 rubber covered bars with thumbscrews. Self contained unit removable from mixer.
