Kartell
Plasticware, disposable products, liquid handling and magnetic stirrers.
Drying Rack 72 Place for draining glassware
The back plate of the 72 place support is made from a single mould of 4 mm rigid High Impact PS. The peg sockets have closed ends eliminating leakage and consequent biohazards. The seamless drip channel collects waste which drains via drain tube provided. 72 push in pegs which can accommodate items with “neck” bore in excess of 15 mm are supplied and 11 small pegs of diameter 6 mm for small diameter items such as test tubes. They are easily removable for cleaning or to accommodate particularly shaped items. This rack will not stain or rust. Comes complete with mounting kit, draining hose, and fixing template. Additional racks can be joined together to make a bank of racks, using the joining plugs provided. Supplied with draining kit (connector + tubes). Discharging tube: internal 11 mm, external 13 mm.
Eye Wash Station -First Eyd
Filtration & vacuum desiccator, PP/PC, int. diam. 200mm
Implosion proof desiccator. Will take vacuum of -740 mm Hg with loss (absolut zero: -760 mm/HG) not exceeding 20 mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene ‘0’ ring set into the flange of the PP base. A little grease spread on the ‘0’ ring will assist in establishing initial vacuum. Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included (Art. 229); specially grooved stopper in this assembly allows air, when required, to be re-admitted very slowly to avoid disturbing the contents.
Usage Instructions:
• remove the cover in PC - insert the samples in the pan
• open the vacuum retention valve (PE needle) connect the tube of the pump to the desiccator spigot in order to create vacuum
• close the vacuum retention valve
Filtration & vacuum desiccator, PP/PC, int. diam. 250mm
Implosion proof desiccator. Will take vacuum of -740 mm Hg with loss (absolut zero: -760 mm/HG) not exceeding 20 mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene ‘0’ ring set into the flange of the PP base. A little grease spread on the ‘0’ ring will assist in establishing initial vacuum. Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included (Art. 229); specially grooved stopper in this assembly allows air, when required, to be re-admitted very slowly to avoid disturbing the contents.
Usage Instructions:
• remove the cover in PC - insert the samples in the pan
• open the vacuum retention valve (PE needle) connect the tube of the pump to the desiccator spigot in order to create vacuum
• close the vacuum retention valve
