Brannan
Leading glass thermometer and pressure gauge manufacturer. Accredited to ISO9001 : 2008
Baume Hydrometer 250mm 0-10 degrees, divisions: 0.1, acc: +/- 0.2
For liquids heavier than water
Adjusted at 60°F (15.6°C)
Material: soda glass, steel shot ballast, synthetic wax resin
Weight: 36gm
Supplied in a protective, resealable plastic tube
Baume Hydrometer 250mm 0-30 degrees, divisions: 0.5, acc: +/- 1.0
For liquids heavier than water
Adjusted at 60°F (15.6°C)
Material: soda glass, steel shot ballast, synthetic wax resin
Weight: 36gm
Supplied in a protective, resealable plastic tube
Baume Hydrometer 250mm 0-50 degrees, divisions: 1.0, acc: +/- 2.0
For liquids heavier than water
Adjusted at 60°F (15.6°C)
Material: soda glass, steel shot ballast, synthetic wax resin
Weight: 36gm
Supplied in a protective, resealable plastic tube
Baume Hydrometer 250mm 10-20 degrees, divisions: 0.1, acc: +/- 0.2
For liquids heavier than water
Adjusted at 60°F (15.6°C)
Material: soda glass, steel shot ballast, synthetic wax resin
Weight: 36gm
Supplied in a protective, resealable plastic tube
Baume Hydrometer 305mm 0-70 degrees, divisions: 1.0, acc: +/- 2.0
For liquids heavier than water
Adjusted at 60°F (15.6°C)
Material: soda glass, steel shot ballast, synthetic wax resin
Weight: 36gm
Supplied in a protective, resealable plastic tube
Brinometer Hydrometer 230mm 0-100% Brine
To measure the percentage of saturated solution of brine in water at 15.6°C (60°F)
Supplied in a protective, resealable plastic tube
Density Hydrometer (BS 718 : 1991) 250mm 0.600-0.700
BS 718 : 1991 Density Hydrometers - M100 SP Sub-Series Density Hydrometers for Petroleum
British Standard specification BS 718 : 1991 is generally aligned with ISO 387 and ISO 649.
Adjusted for use at 20°C.
Material: soda glass, steel shot ballast, synthetic wax resin
Divs: 0.002 g/ml
Accuracy: 0.002 g/ml.
Bulb diameter: 18-20mm
Approximate weight: 42gm
Supplied in a protective, resealable plastic tube
Density Hydrometer (BS 718 : 1991) 250mm 0.700-0.800
BS 718 : 1991 Density Hydrometers - M100 SP Sub-Series Density Hydrometers for Petroleum
British Standard specification BS 718 : 1991 is generally aligned with ISO 387 and ISO 649.
Adjusted for use at 20°C.
Material: soda glass, steel shot ballast, synthetic wax resin
Divs: 0.002 g/ml
Accuracy: 0.002 g/ml.
Bulb diameter: 18-20mm
Approximate weight: 42gm
Supplied in a protective, resealable plastic tube
Density Hydrometer (BS 718 : 1991) 250mm 0.800-0.900
BS 718 : 1991 Density Hydrometers - M100 SP Sub-Series Density Hydrometers for Petroleum
British Standard specification BS 718 : 1991 is generally aligned with ISO 387 and ISO 649.
Adjusted for use at 20°C.
Material: soda glass, steel shot ballast, synthetic wax resin
Divs: 0.002 g/ml
Accuracy: 0.002 g/ml.
Bulb diameter: 18-20mm
Approximate weight: 42gm
Supplied in a protective, resealable plastic tube
Density Hydrometer (BS 718 : 1991) 250mm 0.900-1.000
BS 718 : 1991 Density Hydrometers - M100 SP Sub-Series Density Hydrometers for Petroleum
British Standard specification BS 718 : 1991 is generally aligned with ISO 387 and ISO 649.
Adjusted for use at 20°C.
Material: soda glass, steel shot ballast, synthetic wax resin
Divs: 0.002 g/ml
Accuracy: 0.002 g/ml.
Bulb diameter: 18-20mm
Approximate weight: 42gm
Supplied in a protective, resealable plastic tube
Density Hydrometer (BS 718 : 1991) 250mm 1.000-1.100
BS 718 : 1991 Density Hydrometers - M100 SP Sub-Series Density Hydrometers for Petroleum
British Standard specification BS 718 : 1991 is generally aligned with ISO 387 and ISO 649.
Adjusted for use at 20°C.
Material: soda glass, steel shot ballast, synthetic wax resin
Divs: 0.002 g/ml
Accuracy: 0.002 g/ml.
Bulb diameter: 18-20mm
Approximate weight: 42gm
Supplied in a protective, resealable plastic tube
