Box & Rack

PIPETTE STAND, VERTICAL

Accomodates 18 pipettes with diameters not exceeding 10 mm, plus 10 pipettes with diameters not exceeding 15 mm. Small holes in base allow drainage. Boss head (supplied) allows for the holder to be raised or lowered on supporting rod of 8-14 mm using the olives supplied.

The custom designed dished base unit with PVC rod (SKU: 262) is available separately.

Transfer solutions between 0.2 mL PCR tubes & 0.5 and 1.5/2.0 mL microcentrifuge tubes

• Blue section holds 96 x 0.2 mL Tubes and 48 x 1.5/2.0 mL tubes on the reverse side
• Purple section holds 48 x 0.5 mL and 48 x 1.5/2.0 mL tubes on the reverse side
• Rotate and customize to suit your application needs - four combinations possible
• Made from polypropylene
• Features alphanumeric well identification
• Tube sizes: 0.2 mL, 0.5 mL and 1.5/2.0 mL
• Dimensions: 11.6 x 4.6 x 1.3 in (29.6 x 11.8 x 3.4 cm)

Each module is interlocked and adjustable with just a twist allowing you to work with multiple sized tubes in the same rack - 10 mL, 13 mL, 15 mL, 20 mL, 50 mL

Made from polypropylene

Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes

Dimensions: 8.8 x 4.3 x 4.3 (22.4 x 11 x 11 cm)

Multi-Colour: purple, blue, green, yellow

Each module is interlocked and adjustable with just a twist allowing you to work with multiple sized tubes in the same rack - 0.2 mL, 0.5 mL, 1.5 mL and 15 mL

Made from polypropylene

Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes

Dimensions: 8.2 x 3.9 x 3.9 (21 x 10 x 10 cm)

Multi-Colour: purple, blue, green, yellow

Made of polycarbonate and fully autoclavable. Designed for transporting tubes, containers, vials, plastic bags and ready-to-use syringes whenever an airtight seal is required. Designed to provide a high degree of safety when transporting antiblastic drugs from the Preparation Center to the site where they will be administered. Completely clear to enable inspection for possible container leakage before opening. The cover has a hermetic sylicon safety seal to ensure containment of fluids or anti-tumor drugs and protects against leakage and/or accidental spill from bottles or seepage from plastic bags. Closes using 4 safety locks preventing accidental opening if the box is dropped. Inside the box, beveled edges and the special design of the bottom guarantee safe, simple and efficient cleaning. An indelible biological hazard symbol is moulded on the outside of the cover. Includes a stainless steel AISI 304 handle for ease of transport and an instruction sheet on use and maintenance.

Ideal for storage of large quantities of 76x26 mm microscope slides. Each unit will accommodate 100 slides. Each cavity is numbered. Batch data can be written on either the inside or outside of the end plates.

360mm x38mm x100mm high

It is strongly recommended that the covers (SKU: 920) are used to avoid dust and other foreign bodies. These can then be stored in the cabinets (SKU: 930).

Slide storing system designed for the classification and storage of microscope slides, made of high impact PMMA and steel.

The semi-transparent ice colour gives an attractive appearance while the metal structure makes it stable, while ensuring the value of lightness, functionality, strength and durability.

It is composed of 4 sliding drawers, a closing cover and four fixed support feet.

Each single drawer can hold up to 13 supports for slides (code 921) and transparent cover plates (code 920), to be ordered separately.

Each slides support can contain 100 microscope slides, easily extractable.

Each cavity is numbered.

The transparent lids guarantee an easy check of the contents, protecting the slides from dust and other foreign bodies.

The complete Storing System can therefore contain up to 5200 slides.

Dimensions: 490mm x475mm x700mm h

Space Saver - shipped flat and easy-to-assemble

Conveniently holds 15 and 50 mL tubes simultaneously

Designed for stable use in water baths

Alphanumeric grid for quick tube location and retrieval

Dimensions: 6.7 x 8.1 x 2.3 in (17.1 x 20.6 x 5.9 cm)

Colour: Orange

Indexing: 1 to 36

Max Tube Dimensions: 18 x 121 mm

Colours: -02 Green

Packaging: 2 racks/pack

36 wells in 6 x 6 format.

Convenient freezer storage.

Numerical index on grid.

Rugged polypropylene construction.

Unique pull tab enables safe removal from freezer racks.

Temperature range: -90°C to + 121°C (autoclavable).

Dimensions: 144 × 144 × 127 mm, 102 mm without lid.

Indexing: 1 to 16

Max Tube Dimensions: 30 x 121 mm

Colours: Blue

Packaging: 2 racks/pack

16 wells in 4 x 4 format.

Convenient freezer storage.

Numerical index on grid.

Rugged polypropylene construction.

Unique pull tab enables safe removal from freezer racks.

Temperature range: -90°C to + 121°C (autoclavable).

Dimensions: 144 × 144 × 127 mm, 102 mm without lid.